Images May Not be Vehicle Specific. For Display Purposes Only.

Innovate LM-2 Digital Air/Fuel Meter UNIVERSAL

Fitments

UNIVERSAL
3812 LM-2 Serial Patch Cable
3813 LM-2 USB Cable
3808 LM-2 Power Cable
3836 LM-2 Carrying Case
3809 LM-2 OBD-II Cable
3811 LM-2 Analog Cable
3814 LM-2 Window Mount
3837 LM-2 Air/Fuel Ratio Meter
Single O2 Basic Kit
3806 LM-2 Single Channel
w/ OBD-ll
3807 LM-2 Pro-V Dual Channel
w/ OBD-ll
3894 LM-2 Air/Fuel Ratio Meter
Dual O2 Basic Kit
3920 LM-2 Single O2 Ultimate Shop Kit
Incl 18 ft. Sensor Cable, Exhaust Clamp, Inductive Clamp, (2) Bung/Plug
3921 LM-2 Dual O2 Ultimate Shop Kit
Incl (2) 18 ft. Sensor Cable, Exhaust Clamp, Inductive Clamp, (4) Bung/Plug

Product Description

The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

  • Patented “Direct Digital” Wideband Technology
  • Wideband O2 Compatible with ALL fuel types
  • Single or Dual Channel Version Available
  • OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
  • Log directly to SD card (included)
  • Playback log data on screen and/or with powerful LogWorks software (included)
  • Large high-contrast graphics LCD
  • Built-in RPM converter (direct frequency or with optional inductive clamp)
  • 4 fully-differential analog inputs
  • 2 configurable linear analog outputs
  • Positive lock connectors for all connections
  • Innovate MTS serial IN and OUT
  • USB connection to your PC

The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

Product Reviews

Be the first to review this item.

Rating
Title
Review
Web Design by
RoxxiStudios